Ionospheric electron density over Resolute Bay according to E-CHAIM model and RISR radar measurements

In this study, predictions of the E-CHAIM ionospheric model are compared with measurements by the incoherent scatter radars RISR at Resolute Bay, Canada, in the northern polar cap. Reasonable coverage was available for all seasons except winter for which no conclusions were drawn. It is shown that ratios of the model-to measured electron densities are close to unity in the central part of the F layer, around its peak. This is particularly evident for summer daytime. Distributions of the ratios are wider for other seasons indicating larger number of cases when the model underestimates or overestimates. E-CHAIM underestimates the electron density at ionospheric topside and bottomside by ～ 10–20 %. At the bottomside, the underestimations are strongest in summer and equinoctial nighttime. At the topside, the underestimations are strongest in autumn nighttime. Model overestimations are noticeable in the middle part of the F layer during dawn hours in autumn. Overall, the model tends to not predict highest-observed peak electron densities and the largest-observed heights of the peak.     

某小型无人机中长波辐射特性测量及辐射强度反演

随着“自杀式”无人机集群的饱和式攻击在战场上发挥巨大威力,如何有效拦截是各国近年来研究的重要方向,而红外探测是最热门也是最高效的探测拦截手段之一。为此,开展某典型无人机目标中长波红外探测试验,获取典型某无人机目标辐射特性数据,完成中长波红外辐射强度反演。同时,考虑环境变化对红外探测的影响,为使用红外探测手段完成无人机目标拦截提供实测效果演示。本文研究结果可作为论证中长波对无人机目标探测差异的依据,以支撑探测体制的选择。     

基于LabVIEW的超精密磨床嵌入式监控系统

针对超精密磨削机床的监控需求,基于NI–sbRIO硬件平台开发了一套应用于超精密磨床状态监测和数据采集的嵌入式监控系统,使用FPGA对温度、振动、声发射等信息进行实时数据采集,并使用实时处理器对数据进行分析和处理,实现对机床的实时状态监测和数据存储。通过FPGA编程取代硬件数据采集卡,成本低,灵活性强。试验表明,该系统能够胜任超精密磨床的监控任务。     

小型固定翼无人机集群综述和未来发展综述

围绕小型固定翼无人机集群这一难度高、发展快、应用前景广阔、多学科交叉的新方向,从集群系统内涵、现有典型项目、关键技术3个角度综述了国内外小型固定翼无人机集群的研究现状。在系统梳理集群系统内涵和应用优势的基础上,从集群协同模式探索、分布指挥体系构建、核心关键技术突破和集群验证等4个视角总结现有典型项目,从体系架构、通信组网、决策与规划、飞机平台、集群飞行、集群安全与集群指控等7个核心点综述了技术研究现状。最后,综合小型固定翼无人机集群中亟需解决的关键技术,展望了这一领域未来的发展趋势。     

导流槽构型对火箭起飞时流场和声场的影响

为了研究四喷管运载火箭起飞时火箭周围噪声环境问题,建立燃气/空气双组分的可压缩流动模型,采用2阶Roe格式、SAS(scale-adaptive simulation)湍流模型和声学类比积分法Ffowcs-Williams Hawkings(FW-H)求解三维Navier-Stokes方程。以单机火箭的噪声问题为对象开展数值模拟,并将噪声数值计算结果与试验数据对比,误差在3dB以内(相对误差小于1.6%),验证预测噪声方法的有效性,进而研究四喷管运载火箭起飞阶段采用不同导流槽构型对箭体舱段区域噪声环境的影响,结果表明:在相同噪声接收点处,单侧导流槽对应的总声压级比双侧导流槽大,两者的总声压级(OASPL)之差最大为10.7dB。另外,当采用单侧导流槽时,沿周向接收点的噪声总声压相对单侧导流槽中心截面呈对称分布,而且沿导流出口方向逐渐增大。所建立的噪声数值方法为大推力捆绑运载火箭舱段的噪声环境预测及其控制提供一定参考。     

高温高速气流总焓接触测试法对比分析

发动机尾焰、燃烧加热、电弧加热器等高温高速气流总焓测量存在较大误差,采用结构优化的质量吸入水冷焓探针,标定后的驻点热流和驻点压力探针(Fay-Riddell公式法)对高温高速气流总焓进行了对比测试。结果表明:焓值为2.5~5 MJ/kg时,焓探针的测试误差约为3.38%,采用Fay-Riddell公式法获得焓值的误差约为3%。焓探针与Fay-Riddell公式法平均偏差约为4.65%。在地面模拟试验时采用两种测焓方法确定测试精度,对减小高温高速气流测焓误差,提高试验模拟精度具有积极的作用。     

航空发动机适航审定喘振与失速影响因素

将气动热力基础理论与适航领域工程问题有机结合,对典型的喘振和失速影响因素开展了系统的研究,发展了一套多影响因素作用下航空发动机稳定裕度快速预估方法;在此基础上以JT9D发动机为研究对象,开展了喘振和失速主要影响因素的影响规律研究,结果显示对风扇部件稳定裕度影响权重最大的是进气畸变,对增压级和高压压气机影响权重最大的是寿命期内结构衰变。研究结果进一步明确了喘振和失速适航条款符合性验证活动的关键要素,完善了条款适航符合性验证流程,为进一步提升我国民用发动机适航审定能力提供了技术支撑。     

空间电动力绳系电流峰值点变化规律研究

为研究电流峰值点在几种影响因素下的变化规律,建立一种能够捕捉绳系电子发射与收集自洽平衡过程的新算法——电路空间耦合算法。为验证该方法的计算精度,以1.35kW霍尔推力器为等离子体源,在真空舱内开展绳系的电荷收集试验,在电路参数方面,计算精度约为12.8%,在场参数方面,计算精度约为3.6%。在此基础上,针对不同偏置电压、绳系长度以及绳系直径,对绳系的绳上电流分布、电势分布以及空间电势分布等参数进行数值计算。结果显示:电动力绳系的电流峰值点会随着偏置电压升高、绳系长度增加及绳系直径增大而发生比例上的向阳极端漂移,揭示了电子轨道运动限制的机制在各类壁面电荷输运机制中占优,导致电流峰值点漂移的产生。     

Optimization and verification of free flight separation similarity law in high-speed wind tunnel

Based on the similarity of separation time, a similarity law optimization method for high-speed weapon delivery test is derived. The typical separation state under wind load is simulated by the numerical method. The real separation data of aircraft, separation data of previous test methods, separation data of ideal wind tunnel test of previous methods, and simulation data of the proposed optimization method are obtained. A comparison of the data shows that the method proposed can improve the performance of tracking. Similarity law optimization starts with the development of motion equations and dynamic equations in the windless state to address the problems of mismatching between vertical and horizontal displacement, and to address the problems of separation trajectory distortion caused by insufficient gravity acceleration of the scaling model of existing light model. The ejection velocity of the model is taken as a factor/vector, and is adjusted reasonably to compensate the linear displacement insufficiency caused by the insufficient vertical acceleration of the light model method, so as to ensure the matching of the vertical and horizontal displacement of the projectile, and to improve the consistency between the test results of high-speed projection and the actual separation trajectory. The optimized similarity law is applicable to many existing free-throwing modes of high-speed wind tunnels. The optimized similarity law is not affected by the ejection velocity and hanging mode of the projectile. The optimized similarity law is suitable not only for the launching of the buried ammunition compartment and external stores, but also for the test design of projectile launching and gravity separation.     

用于光波纳米推力器的颗粒供应技术和光聚积技术研究

为提高光波纳米推力器在轨应用的可行性,针对与其匹配的颗粒供应技术和光聚积技术进行研究。提出整个推进系统的设计思路,通过建立理论计算和数值计算模型,分析颗粒供应技术和光聚积技术的各项核心结构参数的设计方法。计算结果表明:颗粒供应装置的正负电极内径之比(W/D)会影响正负电荷产生的总量之比,在W/D=300/322附近时,正负电荷比例接近1:1。静电诱导电压为9 V,当中和通道长度大于37.5mm时,正负颗粒可以视为完全中和。光聚积设计思路可令聚积球对光能的利用率在32.8%左右。两种相关技术的装置与推力器在结构上能够对接、在性能上可以匹配,从理论上表明了两种支撑技术的可行性。